Filter
Top Products
162
Gvrp Timers(milliseconds)
LeaveAll : 10000
5.4.1.4 debug gvrp
Command: debug gvrp
no debug gvrp
Function: Enable the GVRP debug function: the “ no debug gvrp” command disables this
debug function.
Command mode: Admin Mode
Default: GVRP debug information is disabled by default.
Usage Guide: Use this command to enable GVRP debug, GVRP packet processing
information can be displayed.
Example: Enable GVRP debug.
Switch#debug gvrp
5.4.2 VLAN Troubleshooting Help
& The GARP counter setting in for Trunk ports in both ends of Trunk link must be the
same, otherwise GVRP will not work properly.
It is recommended to avoid enabling GVRP and RSTP at the same time in
ES4626/ES4650. If GVRP is to be enabled, RSTP function for the ports must be disabled
first.
5.5 WEB Management
Click Vlan configuration. The Vlan configuration page is shown. User can configure
the vlan information on the switch.
5.5.1 Vlan configuration
Click Vlan configuration, Vlan configuration. Users can configure the vlan information
on the switch.
5.5.1.1 Create/Remove VLAN