Filter
Top Products
516
3．Configure attributes of the cluster in the commander switch
4. Configure attributes of the cluster in the candidate switch
5. Remote cluster network management
Command Explanation
Global Mode
cluster commander <cluster-name>
[vlan<vlan-id>]
no cluster commander
Create or delete a cluster
cluster ip-pool<commander-ip>
no cluster ip-pool
Configure private IP address pool
for member switches of the cluster
cluster member {candidate-sn <cand-sn> |
mac-address <mac-add>
[<mem-id>] }[password <pass>]
no cluster member < mem-id >
Add or remove a member switch
Command Explanation
Global Mode
cluster auto-add enable
no cluster auto-add enable
Enable or disable adding newly
discovered candidate switch to the
cluster
cluster holdtime < second>
no cluster holdtime
Set holdtime of heartbeat of the
cluster
cluster heartbeat <interval>
no cluster heartbeat
Set interval of sending heartbeat
packets among the switches of the
cluster
clear cluster candidate table
Clear the list of candidate switches
discovered by the commander
switch
Command Explanation
Global Mode
cluster register timer <timer-value>
no cluster register timer
Set interval of sending cluster
registration packet