Filter
Top Products
94
file in binary format
For example: Get system file nos.img from TFTP server 10.1.1.1. Input the information as
below, and then click Apply
2.6.3.2 TFTP server configuration
Click TFTP server service. The configuration page is shown. See the equivalent CLI
command at 2.2.2.2
The explanation of each field is as below:
Server state - Server status, enable or disable. See the equivalent CLI command at
2.5.2.2.10
TFTP Timeout - Value of TFTP timeout. See the equivalent CLI command at 2.5.2.2.12
TFTP Retransmit times - Times of TFTP retransmit. See the equivalent CLI command at
2.5.2.2.11
For example: Enable TFTP server. Check “Enabled” box, then click Apply
2.6.3.3 FTP client configuration
Click FTP client service. The configuration page is shown. See the equivalent CLI
command at 2.5.2.2.3
The explanation of each field is as below:
Server IP address - Server IP address
Local file name - Local file name