Filter
Top Products
385
Function: Enable the RIP packet debug function for sending: the “no debug ip rip send”
command disables the debug function.
Default: Debug is disabled by default.
Command mode: Admin Mode
Example:
Switch#debug ip rip send
00: 02: 50:
start at 170*********************
send packets to 11.11.11.2
packet header: cmd: response, version: 1
no. dest dest_mask gatedway metric
1: 159.226.0.0 0.0.0.0 0.0.0.0 1
00: 02: 50:
start at 170*********************
send packets to 159.226.255.255
packet header: cmd: response, version: 1
no. dest dest_mask gatedway metric
1: 159.222.0.0 0.0.0.0 0.0.0.0 2
2: 11.11.11.2 0.0.0.0 0.0.0.0 2
15.3.3 Typical RIP Scenario
SWITCHA
SWITCHB
SWITCHC
vl an2:
20.1.1.2/24
vl an1:
10. 1. 1. 2/ 24
vl an1:
10.1.1.1/24
vl an2:
20. 1. 1. 1/ 24
Fig 15-2 RIP Scenario
As shown in the figure a network consists of three layer 3 switches. SwitchA and SwitchB
connect to SwitchC through interface vlan1 and vlan2. All the three switches are running
RIP. Assume SwitchA vlan1(10.1.1.1) and vlan2 (20.1.1.1) exchange update information
with SwitchB vlan1 (10.1.1.2) only, update information is not exchanged between switchA
and switchC vlan2 (20.1.1.2).