Filter
Top Products
97
Click show switchport interface. The configuration page is shown. See the equivalent CLI
command at 2.2.4.8
The explanation of each field is as below:
Port - Port list
Select port1/1, and then click Apply. The port Vlan information is shown.
2.6.4.3 Other
Other parts are quite straight forward. Click the node. The relevant information is shown.
There is no need to input or to select.
For example:
Show clock:
Show flash file:
2.6.5 Switch basic information
Click Switch basic information node, the configuration page is shown. See the equivalent
CLI command at 2.2.4.13
The explanation of each field is as below:
Device type - Device type
Software version - Software version
Hardware version - Hardware version