Filter
Top Products
442
equivalent CLI command at 18.4.2.2.8
Sending link-state packet delay – Configure sending link-state packet delay on the port.
See the equivalent CLI command at 18.4.2.2.14
Sending link-state packet retransmit interval – Specify sending link-state packet retransmit
interval to neighbor router. See the equivalent CLI command at 15.4.2.2.13
Reset - Reset
Default - Restore the default value.
15.5.3.3 OSPF Imported route parameter configuration
Click OSPF Imported route parameter configuration. The configuration page is shown.
Imported route parameter configuration – Configure default imported route parameters
Import external routing information – Import external routing information to OSPF
15.5.3.3.1 Imported route parameter configuration
Click Imported route parameter configuration. The configuration page is shown.
The explanation of each field is as below:
Default imported route type – Set default imported route type. 1 and 2 stand for Type 1
external route and Type 2 external route. See the equivalent CLI command at
18.4.2.2.5
Default imported route tag – Configure default imported route tag. See the equivalent CLI
command at 15.4.2.2.4
Default imported route cost – Configure default imported route cost. See the equivalent
CLI command at 15.4.2.2.1
Importe route interval – Configure importe route interval. See the equivalent CLI command
at 15.4.2.2.2
Maximum imported route – Configure maximum number of imported route. See the
equivalent CLI command at 15.4.2.2.3