Filter
Top Products
434
15.5.2 RIP
Click RIP configuration. Users can configure RIP:
Enable RIP – Enable RIP, including:
Enable RIP – Enable RIP
Enable port to receive/transmit RIP packet – Configure the port to receive/transmit RIP
packet
RIP parameter configuration – Configure RIP parameters, including:
Enable imported route – Import routes generated by other routing protocols to RIP
Metric in/out configuration – Configure metric for RIP packets received and sent through
the port
RIP port imported route – RIP port imported route: sending/receiving RIP version,
send/receive packet, Split-horizon status, RIP authentication
RIP mode configuration – Global RIP mode configuration: RIP version, Auto-summary,
Rip priority, Rip checkzero, default metric and Rip broadcast
RIP timer configuration – Configure RIP timer
15.5.2.1 Enable RIP
Click Enable RIP. Users can enable RIP. See the equivalent CLI command at 15.3.2.2.17
The explanation of each field is as below:
Enable RIP – Enable or disable RIP
For example: Check “Enabled” box, and then click Apply.
15.5.2.2 Port receive/transmit RIP packet configuration
Click Enable port to receive/transmit RIP packet. The configuration page is shown. See