Filter
Top Products
483
mask.
Nexthop Next hop address
Interface The interface on which the route is
discovered.
Gateway Gateway address
Metric Route metric value
state Route state (active, hold, etc)
16.5.4.1.4 show ip dvmrp tunnel
Command: show ip dvmrp tunnel [<ifname>]
Function: Display information for a DVMRP tunnel.
Parameter: <ifname> is the interface name, i.e. display the tunnel information of the
specified interface.
Default: Not displayed.
Command mode: Admin Mode
Example: Display tunneling configuration information of Ethernet interface vlan1.
Switch #show ip dvmrp tunnel vlan1
Name: dvmrp2, Index: 7, State: 1195, Parent: 3, Localaddr: 192.168.1.11, Remote:
1.1.1.1
Switch #
Displayed information Explanation
Name Tunnel interface name (auto-generated by
the system)
Index Tunnel interface index number
State Tunnel interface status
Parent The index number of the parent interface
for the tunnel interface
Localaddr Local address of the tunnel interface
Remote Remote end address of the tunnel
16.5.4.1.5 debug ip dvmrp detail
Command: debug ip dvmrp detail
Function: Enable the debug function for displaying detailed DVMRP information; the “no”
format of this command disables this debug function.
Parameter: N/A.
Default: Disabled.