Filter
Top Products
300
11.6.1.9 Excluded address
Click DHCP configuration, DHCP server configuration, Manual address pool
configuration.Users can configure the exclusive addresses on the DCHP pool. See the
equivalent CLI command at 11.2.2.10:
Starting address – Specify starting address
Ending address - Specify ending address
Operation type – Apply or delete the operation
For example: Set Starting address to 10.1.128.1; set Ending address to 10.1.128.10;
set Operation type to Add address not for allocating dynamically, and then click Apply.
The configuration is applied on the switch.
11.6.1.10 DHCP packet statistics
Click DHCP configuration, DHCP server configuration, DHCP packet statistics. Users
can display DHCP packet statistics. See the equivalent CLI command at 11.5.1.3: