Filter
Top Products
356
quench
0 parameter, 0 timestamp, 0 timestamp
replies
Sent: 0 total 0 errors 0 time exceeded
0 redirects, 0 unreachable, 0 echo, 0
echo replies
0 mask requests, 0 mask replies, 0
quench
0 parameter, 0 timestamp, 0 timestamp
replies
Statistics of total ICMP packets sent
and classified information
TCP statistics: TCP packet statistics.
UDP statistics: UDP packet statistics.
14.2.3.1.2 debug ip packet
Command: debug ip packet
no debug ip packet
Function: Enable the IP packet debug function: the “no debug IP packet” command
disables this debug function.
Default: IP packet debug information is disabled by default.
Command mode: Admin Mode
Usage Guide: Display statistics for IP packets received/sent, including source/destination
address and bytes, etc.
Example: Enable IP packet debug.
Switch#debug ip pa
ip packet debug is on
Switch#
Switch#
Switch#
Switch#%Apr 19 15: 56: 33 2005 IP PACKET: rcvd, src 192.168.2.100, dst 192.168.2.1
, size 60, Ethernet0
14.3 ARP
14.3.1 Introduction to ARP
ARP (Address Resolution Protocol) is mainly used in IP address to Ethernet MAC address