Filter
Top Products
93
Click Switch Basic Configuration, SNMP Configuration, RMON and TRAP
configuration. Users can configure switch RMON:
& Snmp Agent state - Enable/disable the switch as SNMP agent. See the
equivalent CLI command at 2.4.4.2.3
& RMON state - Enable/disable RMON on the switch. See the equivalent CLI
command at 2.4.4.2.1
& Trap state - Enable the switch to send Trap messages. See the equivalent CLI
command at 2.4.4.2.4
For example: Set Snmp Agent state to Enabled, set RMON state to Enabled, set Trap
state to Enabled, and then click Apply. The configuration is applied on the switch.
2.6.3 Switch Upgrade
Click Switch update, switch upgrading configuration tree is shown:
TFTP Upgrade:
TFTP client service - TFTP client configuration
TFTP server service - TFTP server configuration
FTP Upgrade:
FTP client service - FTP client configuration
FTP server service - FTP server configuration
2.6.3.1 TFTP client configuration
Click TFTP client service. The configuration page is shown. See the equivalent CLI
command at 2.5.2.2.9
The explanation of each field is as below:
Server IP address - Server IP address
Local file name - Local file name
Server file name - Server file name
Operation type - Upload means to upload file, Download means to download file.
Transmission type - ascii means to transmit file in ASCII format, binary means to transmit