Filter
Top Products
92
2.6.2.3 Configure ip address of snmp manager
Click Switch Basic Configuration, SNMP Configuration. Users can configure the
secure IP address for NMS allowed to access the switch. See the equivalent CLI
command at 2.4.4.2.6
& Security ip address - NMS secure IP address
& State - Valid means to set; Invalid means to delete
For example: Set Security ip address to 41.1.1.100, set State to Valid, and then click
Apply. The configuration is applied on the switch.
2.6.2.4 SNMP statistics
Click Switch Basic Configuration, SNMP Configuration, SNMP statistics. Users can
display SNMP configuration information. See the equivalent CLI command at 2.4.6.1.1.
2.6.2.5 RMON and TRAP configuration