Filter
Top Products
164
5.5.1.2 Allocate port for Vlan
Click Vlan configuration, Vlan configuration, Allocate ports for VLAN. Users can
configure the vlan information on the switch.
5.5.1.2.1 Allocate port for Vlan
Click Vlan configuration, Vlan configuration, Allocate ports for VLAN, Allocate port for
Vlan. Users can add Ethernet ports to VLAN. See the equivalent CLI command at 5.2.2.4
For example: Select VLAN ID as 1; set Port to 1/1, and then click Apply. Ethernet 1/1
is added to VLAN 1.
The current VLAN information is shown in VLAN ID information window:
5.5.1.3 Port type configuration
Click Vlan configuration, Vlan configuration, Port type configuration. Users can
configure port type.
5.5.1.3.1 Set port mode(Trunk/Access)
Click Vlan configuration, Vlan configuration, Port type configuration, Set port
mode(Trunk/Access). Users can configure the port mode: