Filter
Top Products
462
ip pim bsr-candidate <ifname>
[hashlength] [Priority]
no ip pim bsr-candidate
This command is a global candidate BSR
configuration command. It is used to configure
information for PIM-SM candidate BSR and to
comtend for the BSR router with the other
candidate BSRs; the “no ip pim
bsr-candidate” command cancels the BSR
configuration.
2) Configure a switch as the candidate RP.
Command Explanation
Interface Mode
ip pim rp-candidate <ifname>
[group-list access-list] [interval
interval]
no ip pim rp-candidate [<ifname>]
This command is a global candidate RP
configuration command. It is used to configure
information for PIM-SM candidate RP and to
comtend for the RP router with the other
candidate RPs; the “no ip pim rp-candidate
[<ifname>]” command cancels the RP
configuration.
3. Disable PIM-SM protocol
Command Explanation
Interface Mode
no ip pim sparse-mode
Disable PIM-SM protocol
16.4.2.2 PIM-SM Configuration Commands
z ip pim sparse-mode
z ip pim bsr-border
z ip pim hello-interval
z ip pim bsr-candidate
z ip pim rp-candidate
z show ip pim bsr-router
z show ip pim interface
z show ip pim mroute sm
z show ip pim neighbor
z show ip pim rp
z debug ip pim
z debug ip pim bsr