Filter
Top Products
256
Source address type - Specified IP address or allow any address
Source IP address – Specify source IP address
Reverse network mask – Specify reverse network mask
Operation type – Add; Remove
For example: Add a stanard name ACL. Set ACL name to ac1; configure other fields; set
Operation type to Add, and then click Apply.
9.5.5 Extended ACL name configuration
Click ACL name configuration. The configuration page is shown:
IP extended ACL name configuration
ICMP extended ACL name configuration
IGMP extended ACL name configuration
TCP extended ACL name configuration
UDP extended ACL name configuration
Other protocols extended ACL name configuration
Click the node. The configuration page is shown. The configuration is very similar to
extended numeric ALC configuration, but ACL number field is replaced by ACL name
field. See the equivalent CLI command at 9.2.2.5
9.5.6 Firewall configuration
Click Filter configuration. The configuration page is shown.
The explanation of each field is as below:
Packet filtering – Enable or disable. See the equivalent CLI command at 9.2.2.3