Filter
Top Products
238
Click Authentication configuration, 802.1X configuration, 802.1x port mac configuration.
Add a MAC address table to dot1x address filter. It is equivalent to CLI command 8.2.2.3.
z Port –If specify port, the added list only suitable for specific port, specify All Ports,
the added list suitable for all port.
z Mac – added MAC address
z Operation type – add、remove filter MAC
Choose port Ethernet1/1, Configure MAC as 00-11-11-11-11-11, choose Operation type as
Add mac filter entry, Click Apply button, and apply this configuration to switch.
8.5.2.4 802.1x port status list
Click Authentication configuration, 802.1X configuration, 802.1x port status list. Display
port 802.1x configuration information, and may re-authentication for the specific port, the
same as CLI command 1.2.2.11.
z Port – assign port
z 802.1x status – port 802.1x status
z Authentication type –Authentication type
z Authentication status –Authentication status
z Authentication mode –Authentication mode
Choose port Ethernet1/1, then Click Reauthenticate button, the user in port Ethernet1/1
will be force to make re-authentication.