Filter
Top Products
507
Switch(Config-Router-Vrrp)# interface vlan 1
17.2.2.4 enable
Command: enable
Function: Enable the VRRP
Command mode: VRRP Mode
Usage Guide: Enable the virtual router. Users have to configure the VRRP virtual IP
address and the VRRP interface before they enable the VRRP. After this
configuration, the interface is added to the standby group.
Example: Enable the virtual router with the sequence number 10.
Switch(config)# router vrrp 10
Switch(Config-Router-Vrrp)# enable
17.2.2.5 disable
Command: disable
Function: Disable VRRP
Command mode: VRRP Mode
Usage Guide: Disable the relevant virtual router. Users have to disable VRRP before they
change the VRRP configurations.
Example: Disable the virtual router with the sequence number 10.
Switch(config)# router vrrp 10
Switch (Config-Router-Vrrp)# disable
17.2.2.6 vrrp authentication mode
Command: ip vrrp authentication mode text
no ip vrrp authentication mode
Function: Set the authentication mode of the packets sent on the interface to plain text
mode; the “no ip vrrp authentication mode” command restores the default VRRP
authentication mode.
Parameter: text means the VRRP authentication mode is plain text mode.
Command mode: Interface Mode
Default: There is no authentication by default.
Usage Guide: This command is used to avoid the interference of non-group members. All