Filter
Top Products
212
1) Configure port authorization status
2) Configure port access control method: base on MAC address or base on port
3) Configure switch 802.1x extend function
3. The configuration of something about user access equipment（not required）
4. The configuration of something about RADIUS server
1) Configure RADIUS authentication key
2) Configure RADIUS server
3) Configure RADIUS service parameter
1.Enable switch 802.1x function
Command Explanation
Global configuration mode
aaa enable
no aaa enable
Enable switch AAA authentication
function; use the “no” command to disable
switch AAA authentication function .
aaa-accounting enable
no aaa-accounting enable
Enable switch accounting function; use
the “no” command to disable switch
accounting function.
dot1x enable
no dot1x enable
Enable the switch to force client software to
use proprietary 802.1x authentication
packet format; the “no dot1x privateclient
enable” command disables the function and
allows the client software to use standard
802.1x authentication packet format.
2.access control unit property configuration
1) Configure port authorize status