Filter
Top Products
456
show ip pim interface Display PIM-DM interface information
debug ip pim
Enable the debug function for displaying
detailed PIM information; the “no” format of
this command disables this debug function.
16.3.4.1.1 show ip pim mroute dm
Command: show ip pim mroute dm
Function: Display the PIM-DM packet forwarding entry
Parameter: N/A.
Default: No display by default.
Command mode: Admin Mode
Usage Guide: This command is used to display PIM-DM multicast forwarding entries, or
the forwarding entries in the system FIB table for forwarding multicast
packets.
Example: Display all PIM-DM packet forwarding entries.
Switch#sh ip pim mroute dm
BIT Proto: DVMRP 0x2, PIM 0x8, PIMSM 0x10, PIMDM 0x20;
Flags: RPT 0x1, WC 0x2, SPT 0x4, NEG CACHE 0x8, JOIN SUPP 0x10;
Downstream: IGMP 0x1, NBR 0x2, WC 0x4, RP 0x8, STATIC 0x10;
PIMDM Group Table, inodes 7 routes 4:
(5.1.1.100, 225.0.0.1), protos: 0x8, flags: 0x4, 00: 22: 21/00: 03: 30
Incoming interface : Vlan3, RPF Nbr 0.0.0.0, pref 0, metric 0
Outgoing interface list:
(Vlan1), protos: 0x2, UpTime: 00: 22: 21, Exp: /
Prune interface list:
(Vlan2), protos: 0x2, UpTime: 00: 22: 21, Exp: 00: 03: 07
(5.1.1.100, 225.0.0.2), protos: 0x8, flags: 0x4, 00: 18: 52/00: 03: 30
Incoming interface : Vlan3, RPF Nbr 0.0.0.0, pref 0, metric 0
Outgoing interface list:
(Vlan1), protos: 0x2, UpTime: 00: 18: 52, Exp: /
Prune interface list:
(Vlan2), protos: 0x2, UpTime: 00: 18: 52, Exp: 00: 02: 51
Switch#