Filter
Top Products
307
Parameter: N/A.
Command mode: Admin Mode
Example: Display current SNTP configuration.
Switch#show sntp
SNTP server Version Last Receive
2.1.0.2 1 never
12.3.1.2 debug sntp
Command: debug sntp {adjust | packets | select }
no debug sntp {adjust | packets | select}
Function: Display or disable SNTP debug information.
Parameter: adjust stands for SNTP clock adjustment information; packet for SNTP
packets, select for SNTP clock selection.
Command mode: Admin Mode
Example: Display debugging information for SNTP packets.
Switch#debug sntp packets
12.4 WEB Management
Click SNTP configuration. Users can configure SNTP on the switch.
12.4.1 12.4.1 SNTP/NTP server configuration
Click SNTP configuration, SNTP/NTP server configuration. Users can configure
SNTP/NTP server address and SNTP/NTP version. See the equivalent CLI command at
12.1.1
For example: Set Server address to 12.1.1.1; set version to 4, and then click Apply.
The configuration is applied on the switch.
12.4.2 12.4.2 Request interval configuration
Click SNTP configuration, Request interval configuration. Users can configure the