328
Usage Guide: This command indicates whether QoS is enabled or not.
Example:
Switch #show mls-qos
Qos is enabled
Displayed information Explanation
Qos is enabled QoS is enabled.
13.1.4.1.2 show mls qos aggregate-policer
Command: show mls qos aggregate-policer [<aggregate-policer-name>]
Function: Display policy set configuration information for QoS.
Parameter: <aggregate-policer-name> is the policy set name.
Default: N/A.
Command mode: Admin Mode
Example:
Switch #show mls qos aggregate-policer policer1
aggregate-policer policer1 80000 80 exceed-action drop
Not used by any policy map
Displayed information Explanation
aggregate-policer policer1 80000 80
exceed-action drop
Configuration for this policy set.
Not used by any policy map Time of this policy set being
referred to .
13.1.4.1.3 show mls qos interface
Command: show mls qos interface [<interface-id>] [buffers | policers | queueing |
statistics]
Function: Display QoS configuration information on a port.
Parameter: <interface-id> is the port ID; buffers is the queue buffer setting on the port;
policers is the policy setting on the port; queuing is the queue setting for the
port; statistics is the number of packets allowed to pass for in-profile and
out-of-profile traffic according to the policy bound to the port.
Default: N/A.
Command mode: Admin Mode
Usage Guide: Statistics are available only when ingress policy is configured.