Filter
Top Products
207
The explanation of each field is as below:
VLAN ID – Configure query vlan ID
Query State – query state: open or close. See the equivalent CLI command at 7.2.2.6
Robustness – Robustness. See the equivalent CLI command at 7.2.2.7
Query Interval – Query interval. See the equivalent CLI command at 7.2.2.8
Max Response – Maximum response time. See the equivalent CLI command at
7.2.2.9
For example: Select Vlan in the VLAN ID dropdown menu; select Query State as
Open; set other attributes, and then click Apply.
7.5.2.2 snooping configuration
The explanation of each field is as below:
VLAN ID – Configure snooping vlan ID
snooping status – Snooping status: Open or Close. See the equivalent CLI
command at 7.2.2.2
mrouter Port - Mrouter Port. See the equivalent CLI command at 7.2.2.3
Immediate-leave - Immediate-leave or no Immediate-leave. See the equivalent CLI
command at 7.2.2.5
For example: Select Vlan in the VLAN ID dropdown menu; set snooping status to
Open; set other attributes, and then click Apply.
7.5.2.3 IGMP configuration
IGMP configuration is shown as below: