Filter
Top Products
383
RIP information
rip is turning on
default metric 16
neighbour is
preference is 100
Displayed information Explanation
rip is turning on RIP routing is enabled
default metric 16 The default metric for introduced route is
16.
neighbour is The specified destination address.
preference is 100 RIP routing priority is 100.
15.3.2.2.22 debug ip rip packet
Command: debug ip rip packet
no debug ip rip packet
Function: Enable the RIP packet debug function for sending/receiving: the “no debug IP
packet” command disables this debug function.
Default: Debug is disabled by default.
Command mode: Admin Mode
Example:
Switch#debug ip rip pa
"debug ip rip pa" executed successfully.
00: 04: 20:
start at 260*********************
send packets to 11.11.11.2
packet header: cmd: response, version: 1
no. dest dest_mask gatedway metric
1: 159.226.0.0 0.0.0.0 0.0.0.0 1
00: 04: 20:
start at 260*********************
send packets to 159.226.255.255
packet header: cmd: response, version: 1
no. dest dest_mask gatedway metric
1: 159.222.0.0 0.0.0.0 0.0.0.0 2