Filter
Top Products
168
5.5.2 GVRP configuration
Click Vlan configuration, GVRP configuration. Users can configure GVRP.
5.5.2.1 Enable global GVRP
Click Vlan configuration, GVRP configuration, Enable global GVRP. Users can enable
or disable GVRP globally. See the equivalent CLI command at 5.3.2.5.
For example: Select Enable GVRP, and then click Apply. The GVRP is enabled
globally on the switch.
5.5.2.2 Enable port GVRP
Click Vlan configuration, GVRP configuration, Enable port GVRP. Users can enable
or disable GVRP on the port. See the equivalent CLI command at 5.3.2.5
For example: Select port Ethernet1/1; select Enable GVRP, and then click Apply. The
GVRP is enabled on Ethernet 1/1. Note: The GVRP can only be enabled on the trunk
port.
5.5.2.3 GVRP configuration
Click Vlan configuration, GVRP configuration, GVRP configuration. Users can
configure GVRP attributes on the switch:
Port – Specify the port
Join timer(100~327650ms) – Set GARP join timer. See the equivalent CLI command
at 5.3.2.1
Leave timer(100~327650ms) – Set GARP leave timer. See the equivalent CLI
command at 5.3.2.2
Hold timer(100~327650ms) – Set GARP hold timer. See the equivalent CLI command
at 5.2.3.3
Leaveall timer(100~327650ms) – Set GARP leaveall timer. See the equivalent CLI
command at 5.2.3.4
For example: Select port Ethernet1/1; set Join timer to 200; set Leave timer to 100;
set Hold timer to 400; set Leaveall timer to 800, and then click Apply. The configuration is