Filter
Top Products
388
preference is : 100
Explanation to displayed information:
Displayed information Explanation
Automatic network summarization is not in
effect
Disable RIP auto aggregation
default metric for redistribute is : 16 The default metric for introduced route is
16.
neigbour is The specified destination address.
preference is : 100 RIP routing priority is 100.
（2）show ip route
The “show ip route” command can be used to display the information about RIP routes in
the route table: destination IP addresses, network masks, next hop IP addresses, and
forwarding interfaces, etc.
For example, displayed information can be:
Switch#show ip route
Total route items is 2, the matched route items is 2
Codes: C - connected, S - static, R - RIP derived, O - OSPF derived
A - OSPF ASE, B - BGP derived, D - DVMRP derived
Destination Mask Nexthop Interface Pref
C 2.2.2.0 255.255.255.0 0.0.0.0 vlan1 0
R 7.7.7.0 255.255.255.0 2.2.2.8 vlan2 100
R stands for RIP route, i.e., the RIP route with the destination network address of 7.7.7.0,
network mask of 255.255.255.0, the next hop address of 2.2.2.8 and the forwarding
interface of Ethernet vlan2. The priority value of this route is 100.
（3）show ip protocols
“show ip protocols” command can be used to display the information of the routing
protocols running in the switch.
For example, displayed information can be:
Switch#sh ip protocols
RIP information:
Automatic network summarization is not in effect.
default metric for redistribute is : 16
neigbour is: NULL
preference is : 100
RIP version information is:
interface send version receive version
vlan1 V2BC V12
vlan2 V2BC V12
vlan3 V2BC V12
Switch#