Filter
Top Products
236
Click Authentication configuration, 802.1X configuration, open 802.1x function
configuration management list, user may configure switch 802.1x function.
8.5.2.1 802.1X Configuration
Click Authentication configuration, 802.1X configuration, 802.1X configuration. Configure
802.1x global configuration:
z 802.1x status – Enable, disable switch 802.1x function. It is equivalent to CLI
command 8.2.2.5.
z Maximum retransmission times of EAP-request/identiry (1-10 second) - Configure
sending EAP-request/MD5 frame maximum times before switch did not receive
suppliant response and restart authentication. It is equivalent to CLI command
8.2.2.7.
z Reauthenticate client periodically ---permit, forbid to make seasonal
re-authentication for suppliant. It is equivalent to CLI command 8.2.2.12.
z Hold down time for authentication failure (1-65535 second) -Configure suppliant
quiet-period status time after authentication failure, the same as CLI command
8.2.2.13.
z Reauthenticate client interval(1-65535 second) - Configure time interval of switch
reauthentication client. It is equivalent to CLI command 8.2.2.14.
z Resending EAP-request/identity interval(1-65535 second) - Configure time interval
of switch retransfer EAP-request/identity frame to suppliant. It is equivalent to CLI
command 8.2.2.15.
z EAP relay authentication mode - Configure switch to adopt EAP relay method to
make authentication; use the “no” command to configure switch to adopt EAP local
terminating method to make authentication. It is equivalent to CLI command
8.2.2.4.
z MAC filtering – Enable, disable switch dot1x address filter function. It is equivalent
to CLI command 8.2.2.6.
Choose 802.1x status as Enable 802.1x, Configure Maximum retransmission times of
EAP-request/identiry as 1, choose Reauthenticate client periodically as Disable
Reauthenticate, Configure Hold down time for authentication failure as 1, Configure
Reauthenticate client interval as 1, Configure Resending EAP-request/identity interval as
1, Choose EAP relay authentication mode as forbid, choose MAC filtering as forbid, Click
Apply button to apply the configuration to switch.