Filter
Top Products
439
15.5.3.1.1 Enable/disable OSPF
Click OSPF enable. The configuration page is shown. See the equivalent CLI command at
15.4.2.2.19
The explanation of each field is as below:
OSPF enable - OSPF enable; OSPF disable
Reset – Clear the selection
For example: Enable OSPF protocol. Select OSPF enable, and then click Apply.
15.5.3.1.2 OSFP Router-ID configuration
Click Router-ID configuration. The configuration page is shown. See the equivalent CLI
command at 15.4.2.2.18
The explanation of each field is as below:
Router-ID configuration – Configure Router-ID
Reset – Reset parameter
Default – Delete Router-ID
For example: Input ID, and then click Apply.
15.5.3.1.3 OSPF network range configuration
Click OSPF network range configuration. The configuration page is shown. See the
equivalent CLI command at 15.4.2.2.15
The explanation of each field is as below:
Network – Network IP address
Network mask - Network mask
Area ID - Area ID
Advertise – Specify if advertise the summary route: yes or no
For example: Add network range 10.1.1.0/255.255.255.0 to area 1. Set Network to
10.1.1.0; set Network mask to 255.255.255.0; set Area ID to 1; Set Advertise to yes, and
then click Apply.