Filter
Top Products
344
To configure the DSCP mutation mapping should input the required value first, selecting
Set for Operation type, then click Apply.
13.1.5.6.4 IP-Precedence-to-DSCP Mapping
Click IP-Precedence-to-DSCP mapping to entry the configure page.
All sections describe as following:
z IP-Precedence－IP precedence value 0～7
z DSCP－IP precedence value mapping to DSCP value
z Operation type－Set or Remove
If would like to set the IP precedence value 2 mapping to DSCP value 20, it should input
the DSCP value 20 in IP precedence value 2 column, selecting Set for Operation type,
then click Apply.
13.1.5.6.5 DSCP Mark Down Mapping
Click DSCP mark down mapping to entry the configure page.
All sections describe as following:
z Mark down dscp value
z Policed DSCP value1-8－DSCP value table
z Operation type－Set or Remove
If would like to set the DSCP value 10/20 mark down to 30, it should mark down dscp