Filter
Top Products
453
PIM-DM in the appropriate interfaces.
Command Explanation
Interface Mode
ip pim dense-mode
no ip pim dense-mode
Enable PIM-DM protocol; the “no ip pim
dense-mode” command disables PIM-DM
protocol (required)
2. Configure PIM-DM sub-parameters
Configure PIM-DM interface parameters
a. Configure PIM-DM HELLO packet interval
Command Explanation
Interface Mode
ip pim hello-interval
<hello-interval-seconds>
no ip pim hello-interval
Set interval for sending PIM-DM HELLO
packets in the interface; the “no ip pim
query-interval” command restores the default
setting.
3. Disable PIM-DM protocol
Command Explanation
Interface Mode
no ip pim dense-mode
Disable PIM-DM protocol
16.3.2.2 PIM-DM Configuration Commands
z ip pim dense-mode
z ip pim hello-interval
z show ip pim interface
z show ip pim mroute dm
z show ip pim neighbor
z debug ip pim
16.3.2.3 ip pim dense-mode
Command: ip pim dense-mode
no ip pim dense-mode
Function: Enable PIM-DM protocol on the interface; the “no ip pim dense-mode”