Filter
Top Products
180
Switch(Config-Port-Range)#spanning-tree link-type p2p force-true
6.2.2.10 spanning-tree maxage
Command: spanning-tree maxage <time>
no spanning-tree maxage
Function: Set the max aging time for BPDU; The command “no spanning-tree maxage”
restores the default setting.
Parameter: <time> is max aging time in seconds. The valid range is from 6 to 40.
Command mode: Global Mode
Default: The max age is 20 seconds by default.
Usage Guide: The lifetime of BPDU is called max age time. The max age is co working
with hello time and forward delay. The parameters should meet the following conditions.
Otherwise, the MSTP may work incorrectly.
2 * (Bridge_Forward_Delay - 1.0 seconds) >= Bridge_Max_Age
Bridge_Max_Age >= 2 * (Bridge_Hello_Time + 1.0 seconds)
Example: In global mode, set max age time to 25 seconds.
Switch(Config)#spanning-tree maxage 25
6.2.2.11 spanning-tree max-hop
Command: spanning-tree max-hop <hop-count>
no spanning-tree max-hop
Function: Set maximum hops of BPDU in the MSTP region; The command “no
spanning-tree max-hop” restores the default setting.
Parameter: <hop-count> sets maximum hops. The valid range is from 1 to 40.
Command mode: Global Mode
Default: The max hop is 20 by default.
Usage Guide: The MSTP uses max-age to count BPDU lifetime. In addition, MSTP also
uses max-hop to count BPDU lifetime. The max-hop is degressive in the network. The
BPDU has the max value when it initiates from MSTI root bridge. Once the BPDU is
received, the value of the max-hop is reduced by 1. When a port receives the BPDU with
max-hop as 0, it drops this BPDU and sets itself as designated port to send the BPDU.
Example: Set max hop to 32.
Switch(Config)#spanning-tree max-hop 32
6.2.2.12 spanning-tree mcheck
Command: spanning-tree mcheck