Filter
Top Products
382
and perform routing troubleshooting according to the output of this command.
Example:
Switch#sh ip protocols
RIP information
rip is turning on
default metrict 16
neighbour is: NULL
preference is 100
rip version information is:
interface send version receive version
vlan2 V2BC V12
vlan3 V2BC V12
vlan4 V2BC V12
Displayed information Explanation
RIP is turning on The running routing protocol is RIP.
default metric RIP protocol default metric value.
neighbour is: The neighbor layer3 switch connecting to
this RIP switch.
Preference RIP routing priority.
rip version information Display the version information for RIP,
including the RIP version of sending (V1 for
RIP-I, V2 for RIP-II), RIP sending method
(BC for broadcast, MC for multicast), RIP
version of receiving (V1 for RIP-I, V2 for
RIP-II, V12 for both RIP-I and RIP-II).
15.3.2.2.21 show ip rip
Command: show ip rip
Function: Display the current running status and configuration information for RIP.
Command mode: Admin Mode
Usage Guide: The user can check the default metric of RIP route, the specified sending
destination address and metric value according to the output of this command.
Example:
Switch#sh ip rip