Filter
Top Products
39
remote host. If a connection to another remote host is desired, the current TCP connection
must be dropped.
2.2.2.2 Telnet Task Sequence
1. Configuring Telnet Server
2. Telnet to a remote host from the switch.
1. Configuring Telnet Server
Command Explanation
Global Mode
ip telnet server
no ip telnet server
Enable the Telnet server function in the
switch: the “no telnet-server enable”
command disables the Telnet function.
telnet-server securityip <ip-addr>
no telnet-server securityip <ip-addr>
Configure the secure IP address to
login to the switch through Telnet: the
“no telnet-server securityip
<ip-addr>” command deletes the
authorized Telnet secure address.
Admin Mode
monitor
no monitor
Display debug information for Telnet
client login to the switch; the “no
monitor” command disables the
debug information.
2. Telnet to a remote host from the switch
2.2.2.3 Telnet Commands
2.2.2.3.1 monitor
Command Explanation
Admin Mode
telnet [<ip-addr>] [<port>]
Login to a remote host with the Telnet
client included in the switch.