Filter
Top Products
395
default redistribute tag <tag>
no default redistribute tag
Sets the default tag value for introducing
external routes; the “no default redistribute
tag” command cancels the tag value setting.
default redistribute cost <cost>
no default redistribute cost
Sets the default cost for introducing external
routes; the “no default redistribute cost”
command cancels the cost for introducing
external routes. .
default redistribute interval
<time>
no default redistribute interval
Sets the interval for introducing external
routes; the “no default redistribute interval”
command restores the default setting.
default redistribute limit <routes>
no default redistribute limit
Sets the uplimit for external routes
introduction; the “no default redistribute
limit” command restores the default setting.
b. Configure the routes of the other protocols to introduce to OSPF.
Command Explanation
OSPF protocol configuration mode
redistribute ospfase { bgp |
connected | static | rip} [ type { 1 | 2 } ]
[ tag <tag> ] [ metric <cost_value> ]
no redistribute ospfase { bgp |
connected | static | rip }
Introduces BGP routes, direct routes,
static routes and RIP routes as external
routing information; the “no redistribute
ospfase { bgp | connected | static | rip }”
command cancels the introduction of
external routing information.
(3) Configure other OSPF protocol parameters
a. Configure OSPF routing protocol priority
b. Configure cost for OSPF STUB area and default route
c. Configure OSPF virtual link
Command Explanation
OSPF protocol configuration mode
preference [ ase ] <preference >
no preference [ ase ]
Configures the priority of OSPF
among all the routing protocols, and
the priority for AS exterior routes
introduced; the “no preference
[ ase ]” command restores the default
setting.
stub cost <cost> area <area_id >
no stub area <area_id >
Sets an area to STUB area; the “no
stub area <area_id >” command
cancels the setting.