Filter
Top Products
444
OSPF priority relative to other routing protocols.
Priority – set priority value
15.5.3.4.2 OSPF STUB area and default route cost
configuration
Click OSPF STUB area and default route cost. The configuration page is shown. See the
equivalent CLI command at 15.4.2.2.20
The explanation of each field is as below:
Cost – Stub area default cost
areaID – Stub area ID
15.5.3.4.3 OSPF virtual link configuration
Click OSPF virtual link configuration. The configuration page is shown. See the equivalent
CLI command at 15.4.2.2.21
The explanation of each field is as below:
router_id – Configure router_id for virtual link neighbor
transit area – Configure transit area number
hello interval – Configure hello interval
dead interval – Configure route dead interval
retran interval – Configure retransmit interval for LSA
transit delay – Configure transit delay for LSA