Filter
Top Products
273
DHCP packets so that the DHCP packets exchange can be completed between the
DHCP client and server.
ES4626/ES4650 can act as both a DHCP server and a DHCP relay. DHCP server
supports not only dynamic IP address assignment, but also manual IP address binding
(i.e. specify a specific IP address to a specified MAC address or specified device ID over
a long period. The differences and relations between dynamic IP address allocation and
manual IP address binding are: 1) IP address obtained dynamically can be different
every time; manually bound IP address will be the same all the time. 2) The lease period
of IP address obtained dynamically is the same as the lease period of the address pool,
and is limited; the lease of manually bound IP address is theoretically endless. 3)
Dynamically allocated address cannot be bound manually. 4) Dynamic DHCP address
pool can inherit the network configuration parameters of the dynamic DHCP address
pool of the related segment.
11.2 DHCP Server Configuration
11.2.1 DHCP Sever Configuration Task Sequence
2. Enable/Disable DHCP server
3. Configure DHCP Address pool
(1) Create/Delete DHCP Address pool
(2) Configure DHCP address pool parameters
(3) Configure manual DHCP address pool parameters
4. Enable logging for address conflicts
1. Enable/Disable DHCP server
Command Explanation
Global Mode
service dhcp
no service dhcp
Enables DHCP server
2. Configure DHCP Address pool
(1) Create/Delete DHCP Address pool
Command Explanation
Global Mode
ip dhcp pool <name>
no ip dhcp pool <name>
Configures DHCP Address pool
(2) Configure DHCP address pool parameters