Filter
Top Products
166
trunk port. Users can configure vlan attributes of trunk ports:
Set trunk native vlan: Set the native vlan of the port. See the equivalent CLI command
at 5.2.2.7:
Port – Specify the port
Trunk native vlan – Specify native vlan id
Operation type – Set native vlan: Add new VLAN; Remove native vlan: Leave the
native vlan
For example: Select port Ethernet1/8; set Trunk native vlan to 100; select Operation
type to Set native vlan, and then click Set. The native vlan of Ethernet 1/8 is set to vlan
100.
Set trunk allow vlan: Set the allow vlan of the port. See the equivalent CLI command
at 5.2.2.6:
Port – Specify the port
Trunk allow vlan list – Specify allow vlan id list
Operation type – Set allow vlan: Add new allow VLAN; Remove allow vlan: Remove
allow vlan
For example: Select port Ethernet1/8; set Trunk allow vlan list to 31; set Operation
type to Set allow vlan, and then click Set. The allow vlan of Ethernet 1/8 is set to vlan 31.
5.5.1.5 Allocate port for Vlan
Click Vlan configuration, Vlan configuration, Access port configuration. Users can
configure VLAN of the Access port.
5.5.1.5.1 Vlan setting for access port
Click Vlan configuration, Vlan configuration, Access port configuration, Vlan setting