Filter
Top Products
119
Click Port configuration, Vlan interface configuration. The VLAN port configuration
page is shown. Users can configure port Layer 3 information such as IP address and
network mask etc.
3.5.2.1 Allocate IP address for L3 port
Click Port configuration, Vlan interface configuration, Allocate IP address for L3 port.
Users can configure port Layer 3 IP address. See the equivalent CLI command at
3.2.2.2.2:
& Port – Specify port
& Port IP address – Port Layer 3 IP address
& Port network mask – Port network mask
& Port status – Port Layer 3 status
& Operation type – Add or delete IP address
For example: Specify port as Vlan1; set Port IP address to 192.168.1.180; set Port
network mask to 255.255.255.0; set Port status to no shutdown; set Operation type to Add
address, and then click Apply. The configuration is applied on the switch.
3.5.2.2 L3 port IP addr mode configuration
Click Port configuration, Vlan interface configuration, L3 port IP addr mode
configuration. Users can configure the mode of obtaining IP address of the port:
& Port – Specify the port
& IP mode – Specify IP address means users specify the IP address
manually; bootp-client means IP address is obtained by BootP. See
the equivalent CLI command at 3.3.2.2; dhcp-client means that IP
address is obtained by DHCP. See the equivalent CLI command at
3.3.2.2.
For example: Specify port as Vlan1; set IP mode to Specify IP address, and then click
Apply. The configuration is applied on the switch.