Filter
Top Products
277
Command: default-router <address1>[<address2>[…<address8>]]
no default-router
Function: Configure default gateway(s) for DHCP clients; the “no default-router”
command deletes the default gateway.
Parameter: address1…address8 are IP addresses, in dotted decimal format.
Default: No default gateway is configured for DHCP clients by default.
Command Mode: DHCP Address Pool Mode
Usage Guide: The IP address of default gateway(s) should be in the same subnet as the
DHCP client IP, the switch supports up to 8 gateway addresses. The
gateway address assigned first has the highest priority, Therefore address1
has the highest priority, and address2 has the second, and so on.
Example: Configure default gateway for DHCP clients to be 10.1.128.2 and 10.1.128.100.
Switch(dhcp-1-config)#default-router 10.1.128.2 10.1.128.100
11.2.2.5 dns-server
Command: dns-server <address1>[<address2>[…<address8>]]
no dns-server
Function: Configure DNS servers for DHCP clients; the “no dns-server” command
deletes the default gateway.
Parameter: address1…address8 are IP addresses, in dotted decimal format.
Default: No DNS server is configured for DHCP clients by default.
Command Mode: DHCP Address Pool Mode
Usage Guide: Up to 8 DNS server addresses can be configured. The DNS server
address assigned first has the highest priority, Therefore address1 has the
highest priority, and address2 has the second, and so on.
Example: Set 10.1.128.3 as the DNS server address for DHCP clients.
Switch(dhcp-1-config)#dns-server 10.1.128.3
11.2.2.6 domain-name
Command: domain-name <domain>
no domain-name
Function: Configure Domain name for DHCP clients; the “no domain-name” command
deletes the domain name.
Parameter: <domain> is the domain name, up to 255 characters are allowed.
Command Mode: DHCP Address Pool Mode
Usage Guide: Specify a domain name for the client.