Filter
Top Products
334
13.1.5.2.1 Add/Remove Class-map
Click Add/Remove class-map then entry the configure page. It is equivalent to CLI
command 13.1.2.2.2.
All sections describe as following:
z Class - map name
z Operation type－Create class table and Remove class table.
Adding class-map name, specify the class-map name, select Create class table, then click
Apply.
13.1.5.2.2 Class-map Configuration
Click Class-map configuration then entry the configure page. It is equivalent to CLI
command 13.1.2.2.3.
All sections describe as following:
z Class-map name
z Match action which including:
9 access-group First valid－mapping to ACL table. Parameter is the assign
number or name of ACL. First valid means Match value 1 is valid.
9 ip dscp－mapping to DSCP. Parameter is the DSCP value list.
9 ip precedence－mapping to IP priority. Parameter is IP priority value list.
9 vlan－mapping to VLAN ID. Parameter is VLAN ID value list.
9 Match value 1-8－mapping to parameter value table. Input ACL value to
Match value 1 for mapping ACL.
9 Operation type－Set or Remove.
To configure Class-map c1, select c1 to Class-map name, select ip dscp to Match
action, input 3 to Match value 1, select set to Operation type, then click Apply.