Filter
Top Products
254
Users can configure the following types of numeric ACL:
Add ICMP numeric extended ACL - Add ICMP numeric extended ACL
Add IGMP numeric extended ACL - Add IGMP numeric extended ACL
Add TCP numeric extended ACL - Add TCP numeric extended ACL
Add UDP numeric extended ACL - Add UDP numeric extended ACL
Add numeric extended ACL for other protocols - numeric extended ACL for other protocols
Click the node. The configuration page is shown. See the equivalent CLI command at
9.2.2.1
The explanation of each field is as below:
ACL number - ACL number (100-199)
Rule – permit; deny
Source address type – Configure source address type: Specify source address or set to
any source address
Source IP address – Specify source IP address
Reverse network mask – Specify reverse network mask
Target address type – Specify target address type: Specify destination address or set to
any destination address
Destination IP address – Specify destination IP address
Reverse network mask - Specify reverse network mask
Ip precedence – Specify IP precedence
TOS – Specify TOS value
Operation type – Add; Remove
For ICMP type, the following fields need to be configured:
ICMP type – Specify ICMP type
ICMP code - Specify ICMP code
For IGMP type, the following field needs to be configured:
IGMP type - Specify IGMP type
For TCP type, the following fields need to be configured:
Source port – Specify source port
Target port – Specify the target port
TCP sign – Specify TCP sign
For UDP type, the following fields need to be configured:
Source port – Specify source port