343
z Operation-Set or Remove
If would like applying CoS value 2 to map DSCP value 20, it should input the DSCP value
20 in CoS value 2 column, selecting Set for Operation type, then click Apply.
13.1.5.6.2 DSCP-to-CoS Mapping
Click DSCP-to-CoS mapping to entry configure page.
All sections describe as following:
z DSCP 1-8-DSCP value
z CoS Value-DSCP value mapping to CoS value
z Operation type-Add or Remove
If would like applying DSCP value 20 mapping to CoS value 2, it should input the CoS
value 2 and DSCP1 value 20, selecting Set for Operation type, then click Apply.
13.1.5.6.3 DSCP Mutation Mapping
Click DSCP mutation mapping to entry the configure page.
All sections describe as following:
z DSCP mutation name
z Out-DSCP value
z In-DSCP value1-8
z Operation type-Set or Remove