Filter
Top Products
47
sector.
Parameter: <ip-addr> is the target host IP address in dot decimal format. <hostname> is
the hostname for the remote host. <hops> is the maximum gateway number allowed by
Traceroute command. <timeout> Is the timeout value for test packets in milliseconds,
between 100 – 10000.
Default: The default maximum gateway number is 16, timeout in 2000 ms.
Command mode: Admin Mode
Usage Guide: Traceroute is usually used to locate the problem for unreachable network
nodes.
Related command: ip host
2.2.5 show
show command is used to display information about the system , port and protocol
operation. This part introduces the show command that displays system information,
other show commands will be discussed in other chapters.
2.2.5.1 show calendar
Command: show calendar
Function: Display the system clock.
Command mode: Admin Mode
Usage Guide: The user can use this command to check system date and time so that the
system clock can be adjusted in time if inaccuracy occurs.
Example:
Switch#show calendar
Current time is TUE AUG 22 11: 00: 01 2002
Related command: calendar set
2.2.5.2 show debugging
Command: show debugging
Function: Display the debug switch status.
Usage Guide: If the user need to check what debug switches have been enabled, show
debugging command can be executed.