ADC Release 3.1 Network Card User Manual


 
1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
Page 2-162
2000, ADC Telecommunications, Inc.
DLP-730
Page 4 of 4
Table 730-1. NDC Data Statistics
STATISTIC DEFINITION
Connection Name User assigned.
NE ID ID number assigned to the NE where the connection
originates. ID is set via a thumbwheel switch on the SC
EIM at the rear of the shelf.
Card Type Shows the type of card (i.e., T3 CRS, T1 Multi 1, etc.)
Resource Identifies the slot and port number of the card where
the connection originates.
Crct Type Defines the type of circuit (i.e., CES, CRS)
Interval Shows time interval as the fifteen minute block selected
by user (i.e., 01:15 01:30) or as current.
VPI Shows the Virtual Path Identifier assigned to the
connection by user.
VCI Shows the Virtual Channel Identifier assigned to the
connection by user.
Suspect Shows a count of cells that are suspect of having errors
or having been reset.
Supp Shows a count of cells that have been suppressed
Disc Shows a count of cells that have been discarded.
DISC (CLP=0) Shows a count of cells with a Cell Loss Priority of 0
that have been discarded due to congestion on the
network.
Passed Shows a count of cells that have passed.
Ingress Shows a count of cells that have entered the port on this
connection.
Ingress (CLP=0) Shows a count of cells with a Cell Loss Priority of 0
that have entered the port on this connection.
Egress Shows a count of cells that have exited the port on this
connection.
Egress (CLP=0) Shows a count of cells with a Cell Loss Priority of 0
that have exited the port on this connection.