Filter
Top Products
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-253
© 2000, ADC Telecommunications, Inc.
DLP-755
Page 2 of 5
C. CES INTERFACE CONFIGURATION
13. Single click on the port to be assigned as a Circuit Emulation Service port.
14. Select the Circuit Emulation Service option on the Port Level Service Type followed by the
Apply button at the bottom of the screen.
15. Double click on the port to bring up the CES interface screen. Refer to the example shown
in Figure 755-3.
16. Set the CES configuration options as needed using Table 755-3 as a reference.
17. Select the Apply button and then the Close button to return to the T1 card display.
18. Repeat steps 3 through 6 for each T1 Multi 1 port on the card.
19. Select the Close button to return to the Chassis View window.
20. Repeat steps 1 through 20 for each card in the shelf.
Stop! You have completed this procedure.
Cellworx Vision: Card View - T1 Circuit Emulation Service
Status:
Apply Chassis View
Refresh Close
X
Configuration:
Card Level
Administrative State: Congestion Thresholds:
Locked
Unlocked
Ingress:
Egress:
80
80
%
%
Port Level
Administrative State: Transmit Timing Source:
Locked
Unlocked
Received
Local
Service Type:
Circuit Emulation (CES)
Cell relay (CRS)
Line Build Out (LBO):
0-133 feet
Line Coding:
B8ZS
Line Type:
Extended Superframe
Facility Data Link (FDL):
None
Loopback Config:
Send Code:
Looped or normal data
None
Far End Loopback:
None
NE Name: Cellworx1
NE Id: 1
Card: T1 MULTI 1
Slot Number: 8
Port Number: 1
Status
Active
APS
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Port
ADC
T1 MULTI
1
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CLICK ON THE PORT TO
CONFIGURE INDIVIDUAL
DS1 PORTS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
REPAINTS WINDOW
TO REFLECT ANY
CHANGES.
CLOSES CARD LEVEL
VIEW AND RETURNS TO
SHELF LEVEL VIEW.
NE AND CARD TYPE/
SLOT INFORMATION.
CARD REPRESENTATION
WITH REAL TIME ALARM
INDICATIONS.
DS1 PORT LEVEL
CONFIGURATION OPTIONS.
SELECT PORT FIRST.
CARD LEVEL
CONFIGURATION OPTIONS.
13448-C
Figure 755-1. T1 Multi 1 Card Configuration Window