Filter
Top Products
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-204
2000, ADC Telecommunications, Inc.
DLP-740
Page 2 of 5
9. The Icons now stay positioned in the new locations and maintain the highlighted
connection between them. This capability enables the user to group NEs that may be
collocated, or separate them according to their geographical locations. The user may also
return the icons to their original positions on the screen by selecting the Configuration pull
down menu, Topology, and Revert to Saved Icon Layout or Alt+C, Alt+T, and Alt+V.
Refer to Figure 740-6.
10. To save the new icon layout displayed on the screen, select File and Save Icon Layout
(Alt+F and Alt+S), or use the diskette icon on the tool bar. See Figure 740-7.
11. The confirmation window appears as shown in Figure 740-8. Select OK. The newly drawn
icon layout will remain this way each time the GUI is launched, until the layout is redrawn
and saved again.
Stop! You have completed this procedure.
Cellworx Vision Subnetwork Management System
File Configuration Fault Performance
Software
NMIC Platform
Topology
Time and Date
Connection
10974-E
Refresh...
Remove Expansion Shelf Network Element
Remove Ring Network Element
Add Expansion Shelf Network Element
Add Ring Network Element
Force Network Discovery ...
Turn Up Ring...
Revert to Saved Icon Layout...
Ring Audit
Ring Upgrade
Figure 740-1. Cellworx Vision Remove Ring NE Pull Down Menu