Filter
Top Products
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-269
© 2000, ADC Telecommunications, Inc.
DLP-760
Page 1 of 3
RETRIEVE 155 CRS STATUS
Summary: This procedure defines the information retrieved from the shelf level GUI card status
display for the 155 CRS card. User must have the GUI launched and accessed the shelf level GUI
display per NTP-007 prior to performing this procedure.
1. Double click on the 155 CRS card located in the shelf level GUI “Chassis View” at the top
of the window.
2. Click the small block between the Status and Configuration sections and drag it downwards
to view all the status information. Refer to Table 760-1 for definitions of status information
provided.
3. Select the Close button to close the screen and return to the shelf view.
Stop! You have completed this procedure.
Cellworx Vision: Card View - OC3c Cell Relay Service Single Mode
Status:
Apply Chassis View
Refresh Close
X
Card Level
Operational State:
Availability State:
Protection Status:
Port Level
NE Name: Cellworx1
NE Id: 1
Card: 155 SM CRS
Slot Number: 9
Port Number: 1
Status
Active
APS
1
2
Port
ADC
155 SM
CRS
Up
Available
Not Protected
Section Status: Line Status: Path Status:
No Alarm
XMT RAI Failure
RCV AIS
TC Alarm Status: No Alarm
Configuration:
Port Level
Timing
XMT AIS
LOF
LOS
No Alarm
No Alarm
AIS
RDI
STS LOP
STS AIS
STS RDI
Unequipped
Signal Label
Mismatch
Synachronization Status: BAD
Receive Path Trace:
Diagnostics
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
REPAINTS WINDOW
TO REFLECT ANY
CHANGES.
CLOSES CARD LEVEL
VIEW AND RETURNS TO
SHELF LEVEL VIEW.
PERFORMS TEST
OVER FIBER
LINK.
CLICK ON BOX AND DRAG
UP OR DOWN TO EXPAND
STATUS OR CONFIGURATION
VIEWS.
13442-B
Figure 760-1. 155 CRS Card Status Window