Filter
Top Products
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-229
© 2000, ADC Telecommunications, Inc.
DLP-749
Page 1 of 3
SET SHELF TIMING RESOURCE
Summary: This procedure details the steps required to select Primary and Secondary timing
input and output sources for clocking purposes. This also includes setting the protection modes
for timing selections.
1. From the shelf level GUI Chassis View window, select the Configuration pull down menu
using the mouse to click on it, or by entering “Alt+N” on the keyboard. Refer to Figure 749-
1.
2. Select the Timing Resources option using the down arrow keys to highlight it and hitting
“Enter” or “Return”, or by entering an “Alt+T” on the keyboard.
3. The Timing Resources shelf level GUI display appears as shown in Figure 749-2. Select the
Timing Reference inputs, DS1 Output Sources, Encoding Rules, and Frame Format for
both the Primary and Secondary circuits by clicking on the available selection using the left
mouse button. Refer to Table 749-1 for a description of the selections available.
4. Select the Timing Protection Mode as either Revertive or Non-Revertive using the left
mouse button, and enter a revertive time in minutes using the up/down arrow next to the
Revert Time block
5. Select the Apply button at the bottom of the window to send the new configuration data to
the database.
6. Select the Close button at the bottom of the window to return to the shelf level GUI Chassis
View screen.
Stop! You have completed this procedure.
Cellworx Vision: Chassis View, Network Element 2
File Configuration Fault Security
S
C
N
M
I
C
S
C
6
2
2
R
i
n
6
2
2
R
i
n
X
T
3
T
M
U
X
T
M
U
X
E
X
T
1
M
u
l
t
i
Hardware Inventory
Protection Groups
Timing Resources
Reset Slots
T
3
C
R
S
T
3
C
R
S
E
1
M
u
l
t
E
1
M
u
l
t
SELECT THE CONFIGURATION
PULLDOWN MENU USING LEFT
MOUSE BUTTON OR BY PRESSING
THE ALT+N KEYS SIMULTANEOUSLY.
13471-B
Figure 749-1. Shelf Level GUI Configuration Pull Down Menu