Filter
Top Products
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-242
© 2000, ADC Telecommunications, Inc.
DLP-753
Page 2 of 4
Cellworx Vision: Card View - T3 Cell Relay Service
Status:
Apply Chassis View
Refresh
Status
Active
Protect
Timing
Close
X
Configuration:
Card Level
Administrative State: Congestion Thresholds:
Locked
Unlocked
Ingress:
Egress:
80
80
%
%
Port Level
Administrative State: ATM Mapping Type
Locked
Unlocked
PLCP
Direct
Line Build Out (LBO):
NE Name: Cellworx1
NE Id: 1
Card: T3 CRS
Slot Number: 9
Port Number: 1
Port
ADC
T3
CRS
1
2
3
Status
Active
Protect
Timing
Expansion Shelf Interface
Timing Port:
None Port 1 Port 2 Port 3
Circuit Identifier: default
Line Type:
M23
C-bit Parity
Transmit Timing Source:
Recieved
Local
Line Coding: B3ZS
0-150 feet
150-450 feet
Loopback Config:
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
REPAINTS WINDOW
TO REFLECT ANY
CHANGES.
CLOSES CARD LEVEL
VIEW AND RETURNS TO
SHELF LEVEL VIEW.
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
T3 CRS PORT LEVEL
CONFIGURATION OPTIONS.
CARD LEVEL
CONFIGURATION OPTIONS.
NE AND CARD TYPE/
SLOT INFORMATION.
CARD REPRESENTATION
WITH REAL TIME ALARM
INDICATIONS.
CLICK ON THE PORT TO
CONFIGURE INDIVIDUAL
DS1 PORTS.
13450-C
Ring Selection:
Auto Ring 16 Ring 17
Figure 753-1. T3 CRS Configuration Screen
Table 753-1. T3 CRS Configuration Options
SELECTION DEFAULT OPTIONS DEFINITIONS
Slot # 2 2 to 15 for Ring NE
2 to 15 for STN-
EPS
Physical slot locations of the T3 cards in the
shelf.
Admin State
(Card or Port)
LOCKED LOCKED/
UNLOCKED
Locked = Out of service.
Unlocked = In service.
Congestion
Threshold
0 0 to 100 Threshold for CLP=1 cells to be discarded on
the ingress/egress path.
Ring Selection Auto Auto
Ring 16
Ring 17
Card will automatically select traffic from the
ring direction with the best signal.
Card will receive traffic from Ring 16 direction.
Card will receive traffic from Ring 17 direction.
Expansion Shelf
Interface
Not Selected Selected
Not Selected
Determines if the card is being used as an
expansion shelf interface (SEPIC) in an EPS or
RNE. Click on the box to select it.
(continued)