Filter
Top Products
1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-222
© 2000, ADC Telecommunications, Inc.
DLP-747
Page 2 of 5
C. CES INTERFACE CONFIGURATION
13. Double click on one of the ports available (1 to 16). The CES interface screen appears.
Refer to the example shown in Figure 747-2.
14. Set the CES configuration options as needed using Table 747-3 as a reference.
15. Select the Apply button and then the Close button to return to the E1 card display.
16. Repeat steps 3 through 6 for each E1 Multi 1 port on the card.
17. Select the Close button to return to the Chassis View window.
18. Repeat steps 1 through 17 for each card in the shelf.
Stop! You have completed this procedure.
Cellworx Vision: Card View - E1 Circuit Emulation Service
Status:
Apply Chassis View
Refresh Close
X
Configuration:
Card Level
Administrative State: Congestion Thresholds:
Locked
Unlocked
Ingress:
Egress:
80
80
%
%
Port Level
Administrative State: Transmit Timing Source:
Locked
Unlocked
Recieved
Local
Service Type:
Circuit Emulation (CES)
Cell relay (CRS)
Line Build Out (LBO):
120 Ohms
Line Coding:
Line Type:
Facility Data Link (FDL):
None
E1 CRC-4 MF
Loopback Config:
Circuit Identifier:
None
default
NE Name: Cellworx1
NE Id: 1
Card: E1 MULTI 1
Slot Number: 8
Port Number: 1
Status
Active
APS
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Port
ADC
E1 MULTI
1
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CLICK ON THE PORT TO
CONFIGURE INDIVIDUAL
E1 PORTS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
REPAINTS WINDOW
TO REFLECT ANY
CHANGES.
CLOSES CARD LEVEL
VIEW AND RETURNS TO
SHELF LEVEL VIEW.
NE AND CARD TYPE/
SLOT INFORMATION.
CARD REPRESENTATION
WITH ALARM
INDICATIONS.
E1 PORT LEVEL
CONFIGURATION OPTIONS.
SELECT PORT FIRST.
CARD LEVEL
CONFIGURATION OPTIONS.
HDB3
Ring Selection:
0026-049
Figure 747-1. E1 Multi 1 Card Configuration Window