Filter
Top Products
1152700 • Issue 1 • February 2001 • Operation and Maintenance
Page 2-359
© 2000, ADC Telecommunications, Inc.
DLP-785
Page 3 of 7
channel of the interface desired to make it “Current” to allow configuration changes or to
delete that interface.
16. Select the Close button to return to the FT1 FRS card display.
17. Select the Close button to return to the Chassis View window.
18. Repeat steps 1 through 14 for each card in the shelf.
Stop! You have completed this procedure.
Cellworx Vision: Card View - T1 Frame Relay Service
Status:
Apply Chassis View
Refresh Close
X
Configuration:
Card Level
Administrative State: Congestion Thresholds:
Locked
Unlocked
Ingress:
Egress:
80
80
%
%
Port Level
Administrative State: Transmit Timing Source:
Locked
Unlocked
Recieved
Local
Circuit Identifier:
default
NE Name: Cellworx1
NE Id: 20
Card: FT1 FRS
Slot Number: 12
Port Number: 1
Status
Active
APS
1
2
3
4
5
6
7
8
Port
ADC
FT1
FRS
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CLICK ON ANY PORT TO
CONFIGURE INDIVIDUAL
FT1 PORTS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
REPAINTS WINDOW
TO REFLECT ANY
CHANGES.
CLOSES CARD LEVEL
VIEW AND RETURNS TO
SHELF LEVEL VIEW.
NE AND CARD TYPE/
SLOT INFORMATION.
CARD REPRESENTATION
WITH ALARM
INDICATIONS.
T1 PORT LEVEL
CONFIGURATION OPTIONS.
SELECT PORT FIRST.
CARD LEVEL
CONFIGURATION OPTIONS.
Ring Selection:
Auto Ring 16 Ring 17
Line Build Out (LBO):
0-133 feet
Line Coding:
B3ZS
Line Type:
Loopback:
None
Smoothing Constant:
0.3
56 Kbps
None
ANSI T1-403
Channel Bit Rate: Facility Data Rate:
64 Kbps
Extended Superframe
Far End Loopback:
None
0026-020
Figure 785-1. FT1 FRS Card Configuration Window